With engineering experience and quality ...
Powder Coating Booths
Electrostatic Powder Coating Booths
Powder coating booths are one of the indispensable equipment used during paint application. In addition to saving paint, it prevents contamination of paint particles to the factory working environment and prevents pollution.
The air flow is from the outside of the cabin to the filters, allowing the personnel who perform the application to work in a healthier environment.
Powder coating booths are produced together with the dust collection system. The filter group is manufactured so that it can be intervened in the cabin, and it can be defined as the interior application of the jet-pulse dust collection system. Pulse valves, compressed air cylinder and other equipment are produced depending on the cabin.
Powder coating booths consist of panels disassembled on the welded chassis and they are brought into operation by assembling on site. Filter groups can be shipped assembled or disassembled depending on the project and transportation conditions.
Powder Coating Facilities
Powder Paint Cooking And Drying Ovens
Powder coating curing ovens are manufactured as sandwich panels and installed on the chassis and disassembled. The interior part of the cooking oven is made of GALVANIZED and the exterior part is made of DKP SAC (Powder coated) material. Cooking oven panels are isolated with 50kg / m3 density STONE WOOL insulation material as standard. In this way, our drying ovens consume less fuel and do not heat the working environment more than necessary. There is a radial type ventilator that provides air circulation in the cooking oven, thanks to the air ducts extending throughout the oven and adjustable grilles placed on the ducts, a homogeneous heat distribution is achieved in the oven.
Temperature control is done by thermocouple placed inside the oven. The oven automatically signals when it reaches the desired temperature and the oven can be adjusted to 0-250 ° C by means of the digital clock on the temperature control panel.
Thermoblok (Heating Unit, Exchanger)
Heating exchangers are designed on the basis of maximum efficiency, minimum fuel consumption. Our thermoblocks mounted in the middle of the oven can increase the oven temperature from ambient temperature to + 250 ºC. The heating exchangers are made of 3mm thickness AISI 309/310 quality STAINLESS STEEL material and last up to 1200 ºC. The smoke pipes used are steel drawn seamless smoke pipes.
The combustion chamber is insulated by 150 mm ROCK WOOL filled panels. There is an intervention cover for the combustion chamber against thermoblock failures. The combustion efficiency is controlled by the peep hole on the thermoblock. There is a gas blast outlet hole against gas jams. There are fans that provide the circulation of the heat produced on the unit, and the air that is absorbed through the oven is heated through the suction window and the temperature is raised to the desired values by pressing it again into the oven.