top of page

Powder Coating Ovens

czg.png

Electrostatic Powder Coating Ovens

It is an industrial equipment where curing and drying processes are used after painting or surface preparation processes in electrostatic powder coating applications.

 

In general, it is classified in three main categories as Tunnel Type, Internal Return and Box type, but it can be produced in different types depending on the needs and settlement options.

Powder Coating Facilities

Powder Paint Cooking And Drying Ovens

Powder coating curing ovens are manufactured as sandwich panels and installed on the chassis and disassembled. The interior part of the cooking oven is made of GALVANIZED and the exterior part is made of DKP SAC (Powder coated) material. Cooking oven panels are isolated with 50kg / m3 density STONE WOOL insulation material as standard. In this way, our drying ovens consume less fuel and do not heat the working environment more than necessary. There is a radial type ventilator that provides air circulation in the cooking oven, thanks to the air ducts extending throughout the oven and adjustable grilles placed on the ducts, a homogeneous heat distribution is achieved in the oven.

 

Temperature control is done by thermocouple placed inside the oven. The oven automatically signals when it reaches the desired temperature and the oven can be adjusted to 0-250 ° C by means of the digital clock on the temperature control panel.

 

Thermoblok (Heating Unit, Exchanger)

Heating exchangers are designed on the basis of maximum efficiency, minimum fuel consumption. Our thermoblocks mounted in the middle of the oven can increase the oven temperature from ambient temperature to + 250 ºC. The heating exchangers are made of 3mm thickness AISI 309/310 quality STAINLESS STEEL material and last up to 1200 ºC. The smoke pipes used are steel drawn seamless smoke pipes.

 

The combustion chamber is insulated by 150 mm ROCK WOOL filled panels. There is an intervention cover for the combustion chamber against thermoblock failures. The combustion efficiency is controlled by the peep hole on the thermoblock. There is a gas blast outlet hole against gas jams. There are fans that provide the circulation of the heat produced on the unit, and the air that is absorbed through the oven is heated through the suction window and the temperature is raised to the desired values by pressing it again into the oven.

Powder Paint Cooking And Drying Ovens

Powder coating curing ovens are manufactured as sandwich panels and installed on the chassis and disassembled. The interior part of the cooking oven is made of GALVANIZED and the exterior part is made of DKP SAC (Powder coated) material. Cooking oven panels are isolated with 50kg / m3 density STONE WOOL insulation material as standard. In this way, our drying ovens consume less fuel and do not heat the working environment more than necessary. There is a radial type ventilator that provides air circulation in the cooking oven, thanks to the air ducts extending throughout the oven and adjustable grilles placed on the ducts, a homogeneous heat distribution is achieved in the oven.

 

Temperature control is done by thermocouple placed inside the oven. The oven automatically signals when it reaches the desired temperature and the oven can be adjusted to 0-250 ° C by means of the digital clock on the temperature control panel.

 

Thermoblok (Heating Unit, Exchanger)

Heating exchangers are designed on the basis of maximum efficiency, minimum fuel consumption. Our thermoblocks mounted in the middle of the oven can increase the oven temperature from ambient temperature to + 250 ºC. The heating exchangers are made of 3mm thickness AISI 309/310 quality STAINLESS STEEL material and last up to 1200 ºC. The smoke pipes used are steel drawn seamless smoke pipes.

 

The combustion chamber is insulated by 150 mm ROCK WOOL filled panels. There is an intervention cover for the combustion chamber against thermoblock failures. The combustion efficiency is controlled by the peep hole on the thermoblock. There is a gas blast outlet hole against gas jams. There are fans that provide the circulation of the heat produced on the unit, and the air that is absorbed through the oven is heated through the suction window and the temperature is raised to the desired values by pressing it again into the oven.

Elektrostatik toz boya fırınlarının başlıca kullanım alanları şunlardır

  • Alüminyum sanayi,

  • Çelik kapı sanayi,

  • Makine sanayi,

  • Aydınlatma sanayi,

  • Beyaz eşya sanayi,

  • Otomotiv yan sanayi,

  • Metal mobilya sanayi,

  • Çelik raf sanayi,

  • Masa, sandalye, kapı kolu, menfez ve stant imalatı,

  • Park bahçe mobilyaları ve çit imalatı,

  • Çocuk oyun parkları imalatı,

  • Tarım araç ve gereçleri imalatı,

  • Elektrik panoları imalatı,

  • Bisiklet imalatı,

  • Panel radyatör imalatı,

  • Mutfak araç ve gereçleri imalatı (tava, tencere, vs.),

  • Cam ve ahşap sanayi

​

Elektrostatik toz boya fırınları yukarıda sayılı sektörlerin olmazsa olmazıdır. Toz boya fırınları ile kedin bünyenizde kendi imalatınızı yapabilir, işçilikten ve zamandan kazanarak işletmenizi daha ilerilere taşıyabilirsiniz. Elektrostatik toz boya fırını imalatını gerçekleştirirken toz boya uygulaması yapan firmalardan en çok gelen şikayetleri göz önünde bulundurarak en doğru ürünü imal ediyoruz. 

bottom of page